|
RFIDREAD-4100
Technical Data
Datasheet 
|
Low cost EM4100 RFID Reader.
Designed for
embedding into products manufactured by third-parties, the
RFIDREAD-4100 Module is a 125kHz low cost
RFID reader module in a
printed circuit board form factor.
Its features are:
- Reads EM4100 compatible transponders. (64bit
Manchester Encoding)
Read Distance: 6cm for cards, and 4cm for keytags.
(*1)
- Small Unit size: 66mm x 34mm.
- On board duel color LED (Red/Green).
- On board buzzer.
- Integrated RFID coil antenna.
- Serial Uart interface Options.
The
RFIDREAD-4100 is
designed to read the popular range of EM4100
compatible proximity cards and transponders available on the general
market.
|
|
RFIDREAD-RW
Technical Data
Datasheet
Read and Write RFID
tags using this free RFID
Application program
Download
this
application
program for the
RFIDREAD-RW,
RFIDREAD-mRW,
and
RFIDRW-E series modules.
Transfer scanned tags to
any open program using this
RFID keyboard wedge
program.
Download
this
keyboard
wedge program for the
RFIDREAD-RW,
RFIDREAD-mRW,
and
RFIDRW-E series modules. |
Low Cost RFID Reader
Writer module.
This low cost RFID
reader writer module is an upgrade of our RFIDREAD-4100
RFID reader. Optimized for 125Khz transponders this unit is able to
read EM4100,
FDXB animal tags, and read and write, T55xx series and EM4205
Tags
Its
features are:
- Reads EM4100 compatible transponders. (64bit
Manchester Encoding).
Reads and Writes T5557 transponders (32cyc/bit
Manchester Encoding).
Read and Write FDX-B animal identification protocol as described in
ISO11784/11785
Reads and Writes EM4205 / EM4305 transponders (32cyc/bit Biphase
Encoding).
- Read Distance: 6cm for cards, and 4cm for keytags.
(*1)
- Small Unit size: 66mm x 34mm.
- On board duel color LED (Red/Green).
- On board buzzer.
- Integrated RFID coil antenna.
- TTL Uart Output.
(*1) Reading distance may increase or
decrease depending on transponder variations, and power supply
condition.
The command set for this RFID Reader Writer
module include the following:
- Set
LED color and function.
- Set
Buzzer Function.
- Read
Block.
- Read
Password Protected Block.
- Write
Block.
- Write
Password Protected Block.
- Enable/Disable
password Protection.
- Emulate
EM4100 tag with T5557 tag.
- Read
FDX-B animal identification transponders.
- Write
FDX-B
animal identification tags
using T5557, EM4205.
The ability of
the T5557and EM4205 transponders to write data allows for greater
flexibility in RFID applications. The ability to create your own ID
codes, store data,
and
duplicate RFID tags is an essential feature in many systems as used in Access
Control, Inventory Tracking, and other numerous applications
where non contact
identification of items is required.
The Emulate EM4100 tag function of the RFIDREAD-RW solves the problem of
not being able to duplicate EM4100 tags or write EM4100 RFID tags with
user
defined data.
Animal identification is a growing industry and our FDX-B read and write
capabilities allow users to identify and create animal tags for their
applications.
We carry a stock of T5557 RFID transponders suitable for this
unit. You
can buy
T55xx transponders direct from our on line
shopfront.
Our Free RFID reader application programs are available for download
and allow
users to quickly read and write RFID transponders, as well as transfer
scanned
tag codes to other user applications such as EXCEL, Notepad,
or any other
application running on a PC that allows keyboard entries to be made.
For a more advanced keyboard wedge application see our free Datasnip
program.
|
|
RFIDREAD-mRW
Technical Data
|
mRFID Series
Micro Sized RFID Reader
Writer modules.
In response to
customer's requests
for a small size RFID reader writer we've developed this miniature RFID
module to fit into a 25x25mm footprint.
This unit is functionally equivalent to our RFIDREAD-RW but with
externally connected LED and Buzzer functions.
This low cost RFID
reader writer module is optimized for 125kHz or 134kHz transponders. It
is able
to read EM4100 Tags as well as perform read and write operations
for the popular T5557/67, EM4205 / EM4305, and HITAGS (Plain
mode) RFID
transponders.
In addition it has read and write FDX-B animal identification tag
functionality as
described by ISO11784/11785. Learn more about FDX-B
protocol. Its
features are:
- Reads EM4100 compatible transponders. (64bit
Manchester Encoding).
Reads and Writes T5557 transponders (32cyc/bit
Manchester Encoding).
Read and Write FDX-B animal identification protocol as described in
ISO11784/11785
Reads and Writes EM4205 / EM4305 transponders (32cyc/bit Biphase
Encoding).
Reads and Writes HITAGS transponders (Plain mode only) with
anti-collision
algorithm.
- Read Distance: 7cm for cards, and 4cm for keytags.
(*1)
- Small Unit size: 25x25x10mm.
- Output control for a duel color LED for Pass
indication
- Buzzer Output Control for Pass indication.
- Integrated RFID coil antenna.
- TTL Uart Output.
- 35mA Current draw at 5V.
|
|
RFIDREAD-mRW-232
Technical Data
|
RFID
Reader
Writer module with RS232 output.
Many RFID
applications require a
RFID reader writer to be directly connected to a RS232 serial port of a
PC. Our RFIDREAD- mRW
RFID module is the core of this unit and it
allows users to
quickly
connect to a PC or other device with a standard RS232 port.
Its
features are:
- Based on our RFIDREAD-mRW
RFID module for reading and writing
the popular EM4100, T5557, EM4205 / EM4305, HITAGS (Plain mode)
and FDX-B
animal
identification.
- 5.5V-15V input supply @ 40mA.
- DB9 connector for direct connection to a RS232 serial
port.
- Small Unit size: 66mm x 36mm.
- Output connections to drive dual color LED
and Buzzer.
- Free RFID application programs available for download.
|
RFIDREAD-mRW-USB
Technical Data
|
RFID
Reader
Writer module with USB connection.
For users requiring a
rfid reader writer with a USB interface we created the
RFIDREAD-mRW-USB
for an ultra-small footprint
and direct connection to the USB port of a
PC. The USB port appears as a virtual serial com port allowing
the
end application to communicate with the reader as if it were connected
to a serial port.
Its
features are:
- Based on our RFIDREAD-mRW
RFID module for reading and writing
the popular EM4100, T5557, EM4205 / EM4305, HITAGS (Plain mode)
and FDX-B
animal
identification.
- Powered directly from the USB port.
- Small Unit size: 66mm x 29mm.
- Output connections to drive dual color LED
and Buzzer.
- Free RFID application programs available for download.
|
|
|
Low cost Animal tag
and
RFID
Reader
Writer module
with External Antenna.
The RFIDRW-E series are RFID reader writer modules with an externally
connected
antenna coil for allowing greater application flexibility. As
well as the popular
EM4100, T5557/67, EM4205 / EM4305 and TIRIS transponders this
unit can
also read
animal
identification tags using the FDX-B and HDX protocols as described by
ISO11784/11785.
This unit comes supplied with our standard rfidcoil-49a antenna
coil
which
needs to be connected for the unit to operate. Alternatively
users can attach
their own antenna and tune the unit by means of
attaching a suitable tuning
capacitor as described in the data sheet.
For antenna connection examples see animal tag and rfid
reader/writer.
These units are available with either RS232 or USB interface.
Its
features are:
- Read/Write FDX-B, and HDX animal
identification
protocol as described in ISO11784/11785, such as the Texas Instruments
RI-TRP-RE2B,
TROVAN ID162
FDX-B, and similar transponders.
Read EM4100 compatible transponders. (64bit
Manchester Encoding).
Read and Write T5557/67 transponders (32cyc/bit
Manchester Encoding).
Reads and Writes EM4205 / EM4305 transponders (32cyc/bit Biphase
Encoding).
Texas Instruments TIRIS 64 bit and Multi-page transponders:
RI-TRP-R… 64 bit Read Only
RI-TRP-W… 80 bit Read/Write
RI-TRP-D… 1360 bit Multi-page
17 pages Read/Write
- Read Distance: >5cm
(2)
- Comes supplied with 1 x RFIDCOIL-49A antenna.
- Small unit size: 66x37mm (232), and 53x36mm
(USB)
- Output control for a duel color LED for Pass
indication
- Buzzer Output Control for Pass indication.
- Free RFID application programs available for download.
RFIDRW-E-TTL
Based on our RFIDRW-E-232E shown above this version features a TTL uart
interface.
The serial outputs are available both in TTL (0-5V) levels and
3.3V levels. In addition it features a regulated 3.3V output for
powering externally connected bluetooth modules or other peripheral
devices.
This version was created as a response to clients needing to connect
our readers to the popular arduino boards, or the HC-05
bluetooth
to serial port modules available in the general
market.
|
RFID485
View Prices
Technical Data
Datasheet
|
RFID
Reader
Writer module
with RS485 interface and External Antenna.
The RFID485 is a RFID reader module with a RS485 interface and
externally connected
antenna coil. The RS485 interface is ideal for connecting multiple
readers on a single pair of communication cable in a daisy chain
arrangement. As
well as the popular
EM4100, T5557/67, EM4205 / EM4305 and TIRIS transponders this
unit can
also read
animal
identification tags using the FDX-B and HDX protocols as described by
ISO11784/11785.
Its
features are:
- Suitable with the following transponders:
EM4100 read only compatible transponders.
Atmel T55xx series of Read/Write transponders.
Read/Write FDX-B and HDX Protocol as defined in ISO11784/11785 for
animal identification.
TIRIS 64 bit and Multi-page transponders:
RI-TRP-R… 64 bit Read Only
RI-TRP-W… 80 bit Read/Write
RI-TRP-D… 1360 bit Multi-page
17 pages Read/Write
Reads and Writes EM4205 / EM4305 transponders
(reduced range). Biphase Encoding 32 cyc/bit.
- Serial RS485 Output in either Half or Full duplex
mode.
- Switch selectable address from 1 to 64.
- Output control for a duel color LED for Pass
indication.
- Buzzer Output Control for Pass indication.
- External RFID Coil Antenna for greater versatility.
- 5.5V-15V input supply @ 88mA.
|
RFIDLOG
View Prices
RFIDLOG-AUX
View Prices
Technical Data
Datasheet |
Dual animal tag rfid data logger
with external antenna and SD card storage.
The
RFIDLOG is a RFID reader module capable of reading animal tags
using the FDX-B and HDX protocols as described by ISO11784/11785.
It features a time and date circuit and SD card interface to allow
scanned
codes to be recorded with a time stamp for animal research and general
data logging applications. Additionally it may be operated in dual mode
with
an auxiliary reader connected for data logging of scanned codes at
two connected locations.
These units come supplied with our standard rfidcoil-160a
antenna
coils
which
need to be connected for the unit to operate. Alternatively
users can attach
their own antenna and tune the unit by means of
attaching a suitable tuning
capacitor as described in the data sheet.
Its
features are:
- Suitable with the following transponders:
FDX-B and HDX Protocol as defined in ISO11784/11785 for
animal identification.
- Serial RS232 Output and Input on a DB9 connector.
- SD card storage interface, using Fat32 file system.
A 2 Gigabyte SD card is supplied with this unit.
- Clock calendar circuit for time and date mark.
- Small unit size: 74.3mm x 74.3mm (RFIDLOG),
and 46.1mm x 38.1mm (RFIDLOG-AUX)
- External RFID Coil Antenna for greater versatility.
Comes supplied with our standard rfidcoil-160a
antenna
coil.
- Operates with 6.0V-15V dc supply voltage.
The RFIDLOG was
created primarily
for animal research applications for rfid tagged animals. The dual
reader
configuration gives this rfid reader the ability to
distinguish in
which direction an animal is traveling.
|
RFIDREAD-3R
 |
Custom RFID Design.
Priority 1 Design can custom design a RFID reader to your requirements.
The RFIDREAD-3R is one such reader designed specifically for one of our
clients.
Its features are:
- Reads EM4100 tags at a minimum rate of 3 tags/s.
- External RFID coil antenna.
- RS232 output.
- RS485 half duplex transmit and receive.
- Memory storage for 300 tag identities.
- Continuous or Triggered event Read modes.
- LED Output.
- Custom command set and functions.
Contact us to discuss a custom RFID reader/writer unit to your
specifications. |
View our range of:
|
